All new digital SSB with remoteable control head
offers the clearest reception ever.
Big dials, a large dot-matrix LCD and well spaced
buttons make Icom’s newest SSB a snap to operate, even in rough seas. A full
key pad, over 1300 channels, wide band RX, Ham band TX (license required) and RX
included, one-touch e-mail access (a SSB first!) with no optional filters
required, front panel headset jack (to keep from waking up the crew), and many
more thoughtful features make this remoteable control head SSB Icom’s most
advanced ever.
Combine the IC-M802 with its award-winning IC-M502
marine VHF cousin and you’ll have the ultimate communications station. They
look as good as they perform!
New! 2002's Best of Show award, AND 2002's
Best SSB Radio Telephone award given to the IC-M802 by the National Marine
Electronics Association (NMEA). The prestigious NMEA award once again goes
to Icom (11/02)!
Features:
- The latest in Icom SSB technology and
construction
- Digital Signal Processing (DSP) virtually
eliminates noise and interference.
- Pindrop clear voice reception
- Digital processing improves data
efficiency
- Industry standard 4 x 8 inch size remote
controller
- Easy to install
- Same faceplate proportions as many other
marine electronics devices
- Only about 4 inches deep, the remote
controller fits in nearly any nav station. The cabinet is designed to
self flush-mount, hiding the hole cut for the remote controller. Hide
the compact main unit
- Mounting bracket for the remote controller
and the speaker is included, in case you choose not to flush mount the
radio.
- Mounting bracket for the main unit is also
included. With its small footprint (less than a foot square), you can
mount the main unit in more out of the way places, like under the
navigator’s seat
- Separate external speaker (required and
included) allows you to place the sound where it’s needed most
- 150 watts of power, 100% duty cycle
- All modes, including RTTY
- 100% E-mail ready, with one touch button
access on the front panel. A SSB first! No filters required.
- Receive 500 kHz - 29.9999 MHz
- Monitor all 976 ITU voice and data channels,
HAM bands and aircraft WX
- 1355 channels
- Transmit: IC-M802 includes HF HAM RADIO
TRANSMIT & RECEIVE. Appropriate HAM license required to transmit on
amateur radio frequencies.
- 160 user programmable memory channels, each
identified by either alpha characters, channel number or frequency
- GPS interface port, NMEA 0183 version 2.0
=> version 2.0 or later. Turn your IC-M802 into a long-range GMDSS
emergency service radio
- Multiple scanning modes
- Rugged main unit metal chassis
- Direct keypad entry
- Large backlit, dot-matrix LCD display with 10
selectable lighting levels
- Large tactile knobs, easy to use in rough
boating conditions
- Backlit keypads offer information
silk-screened right on the backlit keys, eliminating much guesswork when
operating in a dark cabin.
- New automatic antenna tuner AT-140 matches the
transceiver to a long wire antenna.
- New, pre-wired cable connection points
makes installation easier than ever.
- "Pass-through tuning"
automatically tunes for reception.
- Simple electrical connections for easy
installation
- Easy to read and understand owners manual
- 2 year warranty
| General |
- Frequency coverage (Unit : MHz):
- Rx 0.5–29.9999 (continuous)
- Tx
- 1.6– 2.9999, 4.0– 4.9999,
6.0– 6.9999
- 8.0– 8.9999, 12.0–13.9999,
16.0–17.9999
- 18.0–19.9999, 22.0–22.9999,
25.0–27.5000
- Type of emission :
- J3E (SSB), J2B (AFSK), F1B
- (FSK), A1A (CW), H3E (AM*)
- (*Rx only)
- Number of channels : 1355 (max.)
- (160 user programmable; 249 ITU SSB
duplex; 72 ITU SSB simplex; 662 ITU FSK duplex; 160 e-mail; 21 ITU
4MHz simplex; 31 ITU 8MHz simplex)
- Antenna impedance : 50Ω (SO-239)
- Power supply requirement : 13.6V DC ±15%
- Max. current drain (at 13.6V DC):
- Tx (Max. power) 30A (typ.)
- Rx (Max. audio) 3.0A
- Operating temp. range :
- –30°C to +60°C; –22°F to +140°F
- Guaranteed range : –20°C to +55°C;
–4°F to +131°F
- Frequency stability : ±10Hz (at –20°C
to +55°C)
- Dimensions (W×H×D; projections not
included):
- Main unit 240×94×238.4mm;
9-7⁄16×3-11⁄16×9-3⁄8 in
- Controller 220×110×84.4mm;
8-21⁄32×4-11⁄32×3-5⁄16 in
- Speaker 110×110×84.4mm;
4-11⁄32×4-11⁄32×3-5⁄16 in
- Weight :
- Main unit 4.7kg; 10.36lb
- Controller 570g; 1.26lb
- Speaker 370g; 0.81lb
|
| Transmitter |
- Output power : 150, 60, 20W PEP
(Selectable)
- Spurious emissions : –62dB
- Unwanted sideband : 55dB
- Carrier suppression : 40dB
- Microphone impedance : 600Ω
|
| Receiver |
- Sensitivity (at 10dB S/N) :
-
| |
J3E, A1A |
J2B, F1B |
H3E |
DSC (J2B) |
| 0.5 – 1.5999MHz |
6.3µV |
– |
32µV |
0.5µV
(at 1% error rate) |
| 1.6 – 1.7999MHz |
0.89µV |
0.89µV |
6.3µV |
| 1.8 – 3.9999MHz |
0.5µV |
0.5µV |
3.2µV |
| 4.0 –29.9999MHz |
– |
- Spurious response rejection ratio:
- (1.6–29.9999MHz) More than 70dB
- Audio output power (at 13.6V DC) : 4.0W
typical at 10% distortion with a 4Ω load
- Audio output impedance: 4–8Ω
- Clarity variable range : ±150Hz
- GPS interface : NMEA 0183 version 2.0 or
later
|
| Supplied
Accessories |
- Separation cable, OPC-1106 (5m; 16.4ft)
- Hand microphone, HM-135
- External speaker, SP-24
- Mounting bracket kits
- Microphone hanger
- DC power cables
- ACC plugs
- Spare fuses
|
| Options |
- AT-140
HF AUTOMATIC ANTENNA TUNER: Matches the transceiver to a long wire
antenna with little insertion loss. Cable connections are easy to
install. AT-130 is also available.
|
|
